China factory Hole Output Optimized Moment of Inertia Mechanical Speed Variator Planetary Speed Reducer Small Gearbox with Great quality

Product Description

Product Description

hole output Optimized moment of inertia mechanical speed variator Planetary Speed Reducer small gearbox

HangZhou Fubao Electromechanical Technology Co., Ltd. mechanical speed variator Planetary Speed Reducer small gearbox is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CHINAMFG and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.

mechanical speed variator Planetary Speed Reducer small gearbox characteristic:

1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the mechanical speed variator Planetary Speed Reducer small gearbox. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.

2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.

3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.

4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
 

Compared with other reduction machines, mechanical speed variator Planetary Speed Reducer small gearbox machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.

Because of these characteristics,mechanical speed variator Planetary Speed Reducer small gearbox is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.

Product Parameters

WGK series parameters Model number WGK060 WGK085 WGK115 WGK160
Rated output torque 12~40Nm 40~135Nm 90~335Nm 270~900Nm
Reduction ratio L1:3,4,5,7,8,10         L2:12,16,20,25,28,32,35,40,56,64,70
L3:80,100,125,140,160,175,200,250,280,320,350,500,512,700,1000
Planetary gear backlash L1:8arc.min  L2:10arc.min   L3:12arc.min

Detailed Photos

Product Details

Other products

 

Company Profile

HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.

The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CHINAMFG pursuit to make far-reaching contributions.

 

Factory Display

FAQ

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Application: Motor, Machinery, Agricultural Machinery, Packaging Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

pto gearbox

Efficient Power Transmission and Torque Transfer with Miter Gearboxes

Miter gearboxes play a crucial role in ensuring efficient power transmission and torque transfer in mechanical systems:

Direct 90-Degree Motion Change: Miter gearboxes utilize bevel gears to change the direction of rotational motion by 90 degrees. This direct motion change eliminates the need for additional components or complex transmission mechanisms, resulting in minimal power losses.

Optimal Torque Transfer: Bevel gears in miter gearboxes are designed to mesh at a specific angle, allowing for efficient torque transfer between the input and output shafts. This design ensures that a significant portion of the input torque is transmitted to the output shaft, minimizing energy wastage.

Sturdy and Precise Gearing: Miter gearboxes are constructed with high-quality materials and precision machining to ensure proper meshing and engagement of the bevel gears. This enhances the gearbox’s ability to transmit torque accurately and reliably.

Reduced Friction and Wear: The meshing bevel gears in miter gearboxes are engineered for minimal friction and wear. This feature contributes to efficient power transmission over the gearbox’s lifespan and helps maintain consistent torque transfer.

Compact and Space-Efficient Design: The compact nature of miter gearboxes allows for efficient use of available space in mechanical systems. This design minimizes the distance between the input and output shafts, reducing potential energy losses and improving overall efficiency.

Applications in High-Torque Scenarios: Miter gearboxes are often employed in applications requiring high torque transmission, such as heavy machinery, industrial equipment, and automotive systems. Their ability to efficiently handle torque transfer makes them suitable for demanding tasks.

Versatility and Customization: Miter gearboxes can be customized to meet specific torque and power requirements of different applications. This adaptability ensures optimal torque transfer and power transmission in various settings.

Overall, miter gearboxes are designed to provide efficient and reliable power transmission while maintaining high torque transfer capabilities, making them valuable components in a wide range of mechanical systems.

pto gearbox

Differences Between Miter Gearboxes and Other Types of Gearboxes

Miter gearboxes possess distinct characteristics that differentiate them from other types of gearboxes, such as helical, spur, and planetary gearboxes. These differences contribute to their unique capabilities and suitability for specific applications:

  • Gear Arrangement: Miter gearboxes utilize bevel gears that intersect at a 90-degree angle. In contrast, helical and spur gearboxes use parallel or co-planar gear arrangements, and planetary gearboxes feature multiple gears arranged around a central sun gear.
  • Motion Direction Change: Miter gearboxes excel at changing the direction of rotational motion by 90 degrees. Other gearboxes may change motion direction by different angles or maintain the same direction.
  • Compactness: Miter gearboxes are known for their compact design, making them suitable for applications with limited space. Planetary gearboxes, while compact, have a different internal structure.
  • Backlash Control: Miter gearboxes are designed to minimize backlash and ensure accurate motion transfer. Helical and spur gearboxes may have more backlash due to their gear arrangement, while planetary gearboxes can provide good backlash control.
  • Torque and Speed: Different gearboxes vary in their torque and speed capabilities. Miter gearboxes are suitable for moderate torque and speed applications, while planetary gearboxes offer high torque density.
  • Applications: Miter gearboxes are commonly used for applications requiring 90-degree changes in motion direction, such as conveyor systems, printing machinery, and some types of industrial equipment. Helical and spur gearboxes are prevalent in various machinery and equipment. Planetary gearboxes find use in robotics, aerospace, and heavy machinery.

Each type of gearbox has its own advantages and is chosen based on the specific requirements of the application, including space constraints, motion control precision, torque, and speed needs.

pto gearbox

Transmission of Motion at a 90-Degree Angle by Bevel Gears in a Miter Gearbox

Bevel gears in a miter gearbox are specifically designed to transmit motion at a 90-degree angle between intersecting shafts. This is achieved through the unique tooth profile and arrangement of the bevel gears.

Bevel gears have conical-shaped teeth that taper towards the apex of the cone. In a miter gearbox, two bevel gears with identical tooth profiles are mounted on shafts that intersect at a 90-degree angle. The orientation of the teeth allows the gears to mesh smoothly and transmit motion from one shaft to another while changing the direction of rotation by 90 degrees.

As one bevel gear rotates, its conical teeth engage with the teeth of the second bevel gear, causing the second shaft to rotate perpendicular to the first shaft. The gear ratio and tooth configuration determine the speed and torque relationship between the input and output shafts.

Overall, the precise design of bevel gears and their arrangement in a miter gearbox enables efficient and reliable transmission of motion at a right angle, making them well-suited for applications that require changes in direction within mechanical systems.

China factory Hole Output Optimized Moment of Inertia Mechanical Speed Variator Planetary Speed Reducer Small Gearbox   with Great quality China factory Hole Output Optimized Moment of Inertia Mechanical Speed Variator Planetary Speed Reducer Small Gearbox   with Great quality
editor by CX 2023-10-16

Recent Posts

540 pto gearbox

As one of leading 540 pto gearbox manufacturers, suppliers and exporters of products, We offer 540 pto gearbox and many other products.

Please contact us for details.

Mail:540ptogearbox.com

Manufacturer supplier exporter of

540 pto gearbox

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.